Ford 2003 Mustang Workshop Manual page 1369

9. Install the generator. For additional information, refer to
10. Raise the vehicle. for additional information, refer to
11. Install the power steering pump. For additional information, refer to
12. Install the bolt and the body ground.
13. Install the nine bell housing bolts.
14. Install the starter. For additional information, refer to
15. NOTE: This will need to be done as the H-pipe is being positioned.
Connect the LH heated oxygen sensor.
16. NOTE: This will need to be done as the H-pipe is being positioned.
Connect the RH heated oxygen sensor.
Section 414-02 .
Section 100-02 .
Section 211-02
Section 303-06 .
.