Ford 2003 Mustang Workshop Manual page 1414

SECTION 303-01C: Engine — Cobra 4.6L (4V)
IN-VEHICLE REPAIR
Valve Cover LH
Material
Item
Silicone Gasket and Sealant
F7AZ-19554-EA
Metal Surface Cleaner
F4AZ-19A536-RA
Removal and Installation
1. Remove the Hydro Boost brake booster. For additional information, refer to
2. Remove the LH ignition coils. For additional information, refer to
3. Disconnect the engine coolant temperature (ECT) sensor and unclip the wiring harness from the
stud.
4. Unclip the wiring harness from the power steering bracket.
5. Disconnect the electrical connectors from the fuel pulse damper, EGR vacuum regulator
solenoid, supercharger bypass vacuum solenoid, and the differential pressure feedback EGR
system.
Specification
WSE-M4G323-A4
WSE-M5B392-A
2003 Mustang Workshop Manual
Section 206-07
Section 303-07C
.
.