Ford 2003 Mustang Workshop Manual page 1462

SECTION 303-01C: Engine — Cobra 4.6L (4V)
IN-VEHICLE REPAIR
Exhaust Manifold RH
Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to
2. Raise the vehicle. For additional information, refer to
3. Remove the dual converter Y-pipe. For additional information, refer to
4. Remove the starter. For additional information, refer to
5. Remove the exhaust manifold.
1. Remove the nuts.
2. Remove the exhaust manifold.
3. Remove and discard the gasket.
6. To install, reverse the removal procedure.
Use a new exhaust manifold gasket.
Tighten the exhaust manifold nuts in the sequence shown.
2003 Mustang Workshop Manual
Section 414-01
Section 100-02 .
Section 309-00
Section 303-06 .
.
.