Ford 2003 Mustang Workshop Manual page 1481

18. Install the two nuts.
19. Install the transmission. For additional information, refer to Section 308-03B .
20. Lower the vehicle.
21. Fill the engine crankcase with clean engine oil.
22. Install the A/C line. For additional information, refer to Section 412-03 .
23. Install the manifold and tube assembly—accumulator to compressor, 4.6L. For additional
information, refer to Section 412-03 .
24. Install the radiator sight shield.
25. Install the air cleaner outlet tube. For additional information, refer to Section 303-12 .
26. Install the battery ground cable. For additional information, refer to Section 414-01 .
27. Start the engine and check for leaks.