Volume Controls For The Headset Microphone; Making And Receiving Calls Using A Headset - Mitel 6873i User Manual

MAKING CALLS
:
NOTE
For more information about Bluetooth headset support, see "Bluetooth".
1.
When the default (Speaker) audio mode is being used, if a USB headset is connected, or when Blue-
2.
tooth is enabled and a Bluetooth headset is paired, the phone automatically switches the audio mode
to Headset/Speaker. For instructions on how to manually override the audio mode, see
Contact your telephone equipment retailer or distributor to purchase a compatible headset.
:
NOTE
Customers should read and observe all safety recommendations contained in headset operating
1.
guides when using any headset.
Contact your System Administrator for questions regarding supported headsets.
2.

VOLUME CONTROLS FOR THE HEADSET MICROPHONE

On the 6873i, there are three options for the headset microphone volume: Low, Medium, and High. For
information about configuring the headset microphone volume, see "Headset".

MAKING AND RECEIVING CALLS USING A HEADSET

IP PHONE UI
Ensure that you have selected a headset audio mode (see
1.
Phone UI".
If you have a USB headset, insert the USB plug into the USB port (see the Mitel 6873i SIP IP Phone
2.
Installation Guide for more information).
or
Pair and connect your Bluetooth headset (see "Bluetooth").
Press the key to obtain a dial tone or to answer an incoming call. Depending on the audio mode
3.
selected from the Options List, a dial tone or an incoming call is received on either the headset or the
handsfree speakerphone.
"Configuring the Audio Mode Using the IP
USING A HEADSET
"Audio Mode".
124