Show Ip Rpc-Adapter Sessions - Cisco SCE 8000 Installation And Configuration Manual

Appendix B CLI Commands to Verify a Successful Installation
CLI Command Output Samples

show ip rpc-adapter sessions

If working with the Quota Manager, use this command to make sure the connection with the QM is
established:
SCE8000> show ip rpc-adapter sessions
client-name=usr.SM
client-address=/10.240.59.36
started=Mon Apr 06 12:43:01 GMT-04:00 2009
received-message-num=408790
sent-message-num=237292
sent-notifications-num=0
dropped-notifications-num=0
client-username=null
client-name=mcn.SM
client-address=/10.240.59.36
started=Mon Apr 06 12:43:02 GMT-04:00 2009
received-message-num=5715112
sent-message-num=6101181
sent-notifications-num=386768
dropped-notifications-num=0
client-username=null
client-name=mcn.QuotaManager-10.248.64.119_10.240.59.36_SCE.J.API.PRPC
client-address=/10.240.59.36
started=Mon Apr 06 12:43:03 GMT-04:00 2009
received-message-num=404194
sent-message-num=232248
sent-notifications-num=0
dropped-notifications-num=0
client-username=null
Cisco SCE8000 GBE Installation and Configuration Guide
B-10