Copier Management; Using The Copier Management Mode - Kyocera TASKalfa 620 Service Manual

1-3-2

Copier management

In addition to a maintenance function for service, the copier is equipped with a management function which can be oper-
ated by users (mainly by the copier administrator). In this copier management mode, settings such as default settings can
be changed.

(1) Using the copier management mode

Start
Press the System Menu/Counter key.
Press [Job Accounting].
Press [Copy Default].
Press [Machine Default].
Press [Weekly timer] ([Week timer]).
Press [MP tray Setting].
Press [Register Orig. Size].
Press [Document Management].
Press [BOX Management] ([Hard Disk Management]).
Press [Print Report].
Press [Check the counter].
Press [User adjustment].
Press [Language].
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Manage accounting the copy count
(page 1-3-98).
Make copy default settings
(page 1-3-99).
Make machine default settings
(page 1-3-101).
Make weekly timer settings
(page 1-3-103).
Make MP tray settings
(page 1-3-103).
Execute original size
registration (page 1-3-104).
Make document management
default settings (page 1-3-104).
Execute hard disk management
items (page 1-3-104).
Output the report (page 1-3-104).
Check and output the total copy count
(page 1-3-105).
Refresh the drum (page 1-3-105).
Set the language (page 1-3-105).
2KN/2KP
Press [Close].
End
1-3-97