Detaching And Refitting The Mp Paper Feed Pulley, Mp Forwarding Pulley And Mp Separation Pulley - Kyocera TASKalfa 620 Service Manual

Hide thumbs Also See for TASKalfa 620:

Table of Contents

(6) Detaching and refitting the MP paper feed pulley, MP forwarding pulley and MP separation pulley

Follow the procedure below to clean or replace the MP paper feed pulley, MP forwarding pulley and MP separation pulley.

1. Remove the MP unit (see page 1-5-17).

2. Remove each screw from the MP unit front

3. Release the claws of the MP unit front and

rear in the direction of the arrow.

4. Remove the projections from the inserted

parts, and then divide the unit into upper and

Detaching the MP paper feed pulley and MP forward-

5. Remove the spring and lever from the upper

Upper MP unit

Inserted part

Lower MP unit

Figure 1-5-38

Upper MP unit

Figure 1-5-39

Show Quick Links

Table of Contents

Taskalfa 820