Detaching And Refitting The Lower Cleaning Roller - Kyocera TASKalfa 620 Service Manual

Hide thumbs Also See for TASKalfa 620:

Table of Contents

(2) Detaching and refitting the lower cleaning roller

Follow the procedure below to check or replace the lower cleaning roller.

1. Remove the fuser unit (see page 1-5-58).

2. Remove two screws and then remove the

lower cleaning roller unit from the fuser unit.

3. Remove the lower cleaning roller from the

lower cleaning roller unit.

4. Check or replace the lower cleaning roller,

and refit the roller to the fuser unit.

5. Refit the fuser unit.

Figure 1-5-124

Lower cleaning

Lower cleaning roller

Figure 1-5-125

Lower cleaning

Show Quick Links

Table of Contents

Taskalfa 820