Chapter 6 Copier Management; Copy Management; Copy Management Modes - Kyocera KM-1530 Instruction Handbook Manual

CHAPTER 6 COPIER MANAGEMENT

1. Copy management

The total number of copies made by each department can be managed using 7-digit codes for up to 100 departments.

(1) Copy management modes

Setting codes are provided for the copy management modes that have selection items. Only the number of the setting code appears on the copy
quantity display. See the "Setting code" column in the table below for the meanings of those numbers. Initial settings are indicated with an asterisk
( ).
*
Mode
Copy management mode
code
d01 Turning copy management
ON/OFF
Registering ID-codes
d02
d03 Deleting ID-codes
d04 Clearing copy counts
d05 Printing copy management list
d06 Turning printer management
ON/OFF
6-1
Mode content
Turn copy management ON when required (to apply the settings
made). Turn it OFF when not required.
Assigns a 7-digit ID-code. Up to 100 ID-codes can be registered.
Deletes the ID-codes that are no longer needed.
Clears all the copy counts for the various departments after a suitable
period of time. Copy counts cannot be cleared individually.
Prints the number of copies made by ID-code.
Turn ON to use the printer management for printing when using the
printer function of this copier. Turn OFF when not using the printer
management.
* This mode is only displayed when the copier is equipped with the
optional printer board.
Setting code
1: Copy management ON
2: Copy management OFF
*
1: Clear
2: Do not clear
*
1: Printer management
ON
*
2: Printer management
OFF