Pressure Adjustment Of Mp Separation Pulley - Kyocera TASKalfa 620 Service Manual

2KN/2KP-1

(7) Pressure adjustment of MP separation pulley

Perform the following adjustment if no paper feed or multiple sheets of paper occurs for feeding from the MP tray.
Procedure
Select the MP tray for
Press the start key and
Does multiple sheets of
1-5-24
Start
paper feeding.
make a test copy.
paper feed occur?
No
Does no paper
feed occur?
No
End
Spring
Adjusting guide
Screw
Refit two springs and then
refit the MP unit.
Remove the MP unit (see page 1-5-17).
Reverse the MP unit and then remove
two springs.
Yes
Loosen two screws to move the position
of each front/back adjusting guide in the
direction of the white arrow (
Fix each stopper at the center groove
of 3 grooves.
Remove the MP unit (see page 1-5-17).
Reverse the MP unit and then remove
Yes
two springs.
Loosen two screws to move the position
of each front/back adjusting guide in the
direction of the black arrow (
Fix each stopper at the center groove
of 3 grooves.
Spring
MP unit
Stoppers
Screw
Figure 1-5-49
).
).
Adjusting guide