Kyocera TASKalfa 620 Service Manual page 101

Maintenance
item No.
Checking messages
U245
Description
Displays a list of messages on the touch panel of the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Change the screen using the cursor up/down keys to display each message one at a time.
When a message number is entered with the numeric keys and then the start key is pressed, the mes-
sage corresponding the specified number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the paper feed device
U247
Description
Drives each motor of the optional side feeder.
Purpose
To check the operation of the optional side feeder.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the motor to be operated.
When checking the side feeder lift motor (SFLM) operation, set the paper to the side feeder.
The selected item is displayed.
Side feeder
Display
SDECK MOT
SDECK FAN
SDECK LIFT
SDECK CVCL
SDECK FDCL
Large size side feeder
Display
FEED MOT H
FEED MOT L
CONV MOT H
CONV MOT L
LIFT UP-DOWN
3. To stop operation, press the stop/clear key.
If this maintenance item is executed with the upper cover of the side feeder open, detection of the upper
limit is not possible and thus the side feeder lift motor overruns.
Completion
Press the stop key after operation stops. The screen for selecting a maintenance item No. is displayed.
Description
Operation
Side feeder drive motor (SFDM)
Separation fan motor (SPFM) and suction fan motor (IFM)
Side feeder lift motor (SFLM)
Side feeder conveying clutch (SFCCL)
Side feeder paper feed clutch (SFPFCL)
Operation
Side feeder paper feed motor (SFPFM) is turned on at high speed
Side feeder paper feed motor (SFPFM) is turned on at low speed
Side feeder paper conveying motor (SFPCM) is turned on at high
Side feeder paper conveying motor (SFPCM) is turned on at low
Side feeder lift motor (SFLM)
2KN/2KP
1-3-63