Kyocera TASKalfa 620 Service Manual page 31

Installing the toner container.
1. Set the toner container on a flat surface.
* When setting it down with the gear-end fac-
ing down, place some cushioning material
underneath.
2. Tap the top of the toner container at least
ten times.
3. Turn the toner container upside-down and
tap the top of the toner container at least ten
times.
4. Holding the toner container in both hands,
shake it vertically at least ten times to dis-
tribute the toner evenly.
5. Turn the toner container upside-down and
shake it vertically at least ten times.
6. Hold the toner container horizontally and
shake it from side to side at least five times.
7. Turn the toner container upside-down and
shake it from side to side at least five times.
* Do not install the toner container before
shaking it sufficiently. This may cause errors
due to incomplete toner replenishment.
8. Insert the toner container into the machine.
9. Close the front cover.
Figure 1-2-14
Toner container
Figure 1-2-15
2KN/2KP
1-2-11