Kyocera TASKalfa 620 Service Manual page 150

2KN/2KP
Section Jam code
Paper con- 34
veying sec-
tion
35
Fuser 40
section
41
42
43
44
45
46
Eject 50
sensor
Duplex 60
section
62
* Description in ( ) is written for the specified time of less then A4/11" x 8
1-4-6
Description
Misfeed in registration/
transfer section (cassette/
MP tray/optional side
feeder)
Misfeed in registration/
transfer section (duplex
section)
Misfeed in fuser section 1
Misfeed in fuser section 2
Misfeed in fuser section 3
Misfeed in fuser section 4
Misfeed in fuser section 5
Misfeed in fuser section 6
Misfeed in fuser section 7
Misfeed in eject section
Misfeed in duplex feed-
shift section
Misfeed in duplex internal
tray
Registration switch (RSW) does not turn on within specified
time (459 ms for 82 cpm/591 ms for 62 cpm) of feed switch 1
(FSW1) turning on.
Paper does not reach the registration section after the back
end of the paper turns off feed switch 1 (FSW1).
Registration switch (RSW) does not turn off within specified
time (459 ms for 82 cpm/591 ms for 62 cpm) of feed switch 1
(FSW1) turning off.
Registration switch (RSW) does not turn on within specified
time (459 ms for 82 cpm/591 ms for 62 cpm) of feed switch 1
(FSW1) turning on.
Paper does not reach the registration section after the back
end of the paper turns off feed switch 1 (FSW1).
Registration switch (RSW) does not turn off within specified
time (459 ms for 82 cpm/591 ms for 62 cpm) of feed switch 1
(FSW1) turning off.
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from cassette 1).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from cassette 2).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from cassette 3).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from cassette 4).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from optional side feeder).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from MP tray).
Exit switch (ESW) does not turn on within specified time (1350
ms for 82 cpm/1737 ms for 62 cpm) of its turning on (when
paper is fed from duplex section).
Exit switch (ESW) does not turn off within specified time <2000
ms (1000 ms) for 82 cpm/2573 ms (1287 ms) for 62 cpm> of
its turning on.
Feedshift switch (FSSW) does not turn on within specified time
(650 ms for 82 cpm/950 ms for 62 cpm) of exit switch (ESW)
turning on.
Feedshift switch (FSSW) does not turn off within 2000 ms of its
turning on.
Duplex feed switch (DUPFSW) does not turn on within 450 ms
of the duplex switchback motor (DUPSBM) turning on.
Duplex feed switch (DUPFSW) does not turn off within
specified time <2000 ms (1000 ms) for 82 cpm/3000 ms (1500
ms) for 62 cpm> of its turning on.
" size.
1/2
Conditions