Kyocera TASKalfa 620 Service Manual page 56

2KN/2KP
Maintenance
item No.
Adjusting the amount of slack in the paper
U051
Description
Adjusts the amount of slack in the paper.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key. The screen for selecting an item is displayed.
2. Select Plain or Thick on the touch panel.
3. Select the item to be adjusted.
Display
LOW SPEED
DATA
HIGH SPEED
DATA
LOW DUPLEX
DATA
HIGH DUPLEX
DATA
CASSETTE1
DATA
BYPASS DATA
4. Press the interrupt key.
5. Place an original and press the start key to make a test copy.
6. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
7. Press the start key. The value is set.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
1-3-18
Description
Description
Amount of slack at the registration
roller for low speed conveying
Amount of slack at the registration
roller for high speed conveying
Amount of slack at the registration
roller for duplex low speed feed
Amount of slack at the registration
roller for duplex high speed feed
Amount of slack at the registration
roller for cassette 1 feed
Amount of slack at the registration
roller for MP feed
Original
Figure 1-3-3
Setting
range
-120.0 to
+120.0
-120.0 to
+120.0
-120.0 to
+120.0
-120.0 to
+120.0
-120.0 to
+120.0
-120.0 to
+120.0
Copy Copy
example 1 example 2
Initial Change in
setting value per step
3 0.6 mm
3 0.6 mm
3 0.6 mm
3 0.6 mm
3 0.6 mm
3 0.6 mm