Detaching And Refitting The Drum Heater - Kyocera TASKalfa 620 Service Manual

Hide thumbs Also See for TASKalfa 620:

Table of Contents

(2) Detaching and refitting the drum heater

Follow the procedure below to replace the drum.

1. Remove the drum (see page 1-5-44).

2. Remove two screws and then remove the

front drum flange from the drum.

3. Remove two connectors connected to the

inner side in the front drum flange.

4. Pull out the rear drum flange slowly from the

drum with the drum stay, and remove the

Front drum flange

Figure 1-5-93

Figure 1-5-94

Show Quick Links

Table of Contents

Taskalfa 820