Kyocera TASKalfa 620 Service Manual page 70

2KN/2KP
Maintenance
item No.
Checking the scanner operation
U073
Description
Simulates the scanner operation under the arbitrary conditions.
Purpose
To check the scanner operation.
Implementation
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be operated. The selected item is displayed in reverse.
Display
SCANNER MOT
HOME POTION
DP READING
DUST CHECK
Setting: Scanning size
1. Select SCANNER MOT in the screen for selecting an item.
2. Press the start key.
3. Change the setting using the cursor up/down keys.
Display
ZOOM
SIZE
LAMP
Original sizes for each setting in SIZE
Setting
5000
4300
5100
10000
8600
7100
6100
4. Press the start key. The setting is set. Scanning starts under the selected conditions.
5. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key with the scanning operation stopped.
The screen for selecting a maintenance item No. is displayed.
1-3-32
Description
Operation
Scanner operation
Home position operation
DP scanning position operation
Dust adhesion check operation with lamp on
Operating conditions
Magnification
Original size
On and off of the exposure lamp
Paper size Setting
A4 5000
B5 7800
" " 10200
11 x 8
1/2
A3 9000
B4 8400
A4R 6600
B5R 5100
Setting range
25 to 400%
See below.
0 (off) or 1 (on)
Paper size
A5R
Folio
" "
11 x 17
" "
11 x 15
" "
8 x 14
1/2
" "
8 x 11
1/2
" "
5 x 8
1/2 1/2