Network Critical SmartNA-X User Manual page 85

C L I R
OMMAND INE NTERFACE EFERENCE
S /S
ET HOW NAME
Use the set name command to set a system name string. Use the show name command to display the system name
string.
Command form set name name-string
show name
name-string
Examples • Set the system name string to SmartNA-X 10G Network Access:
CONTROLLER>set name SmartNA-X 10G Network Access
• Show system name string:
CONTROLLER>show name
SmartNA-X 10G Network Access
|
Specifies the appliance name. Use up to 19 alphanumeric characters (spaces
allowed). If the string includes a comma and you are using a RADIUS server, the
comma will replaced by an underscore when viewed in server logs. Default value:
"Network Critical".
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
80