Managing Smartna-X Through The Cli - Network Critical SmartNA-X User Manual

O | M S NA-X
VERVIEW ANAGING MART
TIP: Hover the pointer over a line to dim the other lines in the map
Figure 1-8 Hover over a map line to dim all other mappings

Managing SmartNA-X through the CLI

The Command Line Interface (CLI) is a network management application operated through a Secure Shell (SSH)
without the use of a Graphic User Interface (GUI) driven software application. The SmartNA-X CLI provides
access to a full set of administrative, user and audit level commands and allows for automated configuration using
a program such as Tcl, ("Tool Command Language") with the Expect
See Appendix A, "Command Line Interface Reference", page 69
Accessing the CLI
The SmartNA-X CLI can be accessed through a Secure Shell (SSH) via the device's network interface address:
example.com ~# ssh admin@192.168.254.100
First time of connecting from a host, you will be asked to verify the authenticity of the SmartNA-X host. Entering
'yes' will allow you to continue:
The authenticity of host '192.168.254.100 (192.168.254.100)' can't be established.
RSA key fingerprint is 50:e6:0b:6d:...
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.254.100' (RSA) to the list of known hosts.
You'll then be asked to enter your login credentials to gain access to the CLI (as indicated by the
"CONTROLLER>" prompt):
Enter the account password to login:
admin@192.168.254.100's password: *****
Welcome to the Smart Network Access System
(c) Copyright 2007-2010 Network Critical Solutions Ltd, All Rights Reserved
Last login: Mon May 16 09:50:22 2011 from 192.168.254.111
CONTROLLER>
The CONTROLLER> prompt provides access to system Controller (motherboard) commands, including
commands for managing SNMP communities and groups, user accounts, network interface settings, port maps
and packet filters.
1.Expect is a tool for automating interactive applications such as ssh, telnet, ftp, passwd, fsck, rlogin, tip, etc.
S NA™ 10G N
MART
(Figure
1
package installed.
for a description of all CLI commands.
DRAFT
A (S
ETWORK CCESS MART
1-8).
NA-X)
8