Network Critical SmartNA-X User Manual page 22

S S NA-X | L
ETTING UP MART OGGING IN TO
CAUTION: For security, the default usernames and passwords should be changed in the first instance to prevent
unauthorized access to SmartNA-X.
User
Administrator
Operator
Audit
Table 3-1 SmartNA-X default user accounts
Logging in to the web UI
To log in to the SmartNA-X web UI
• network access to the SmartNA-X Management/Network port (default IP: 192.168.254.100)
• a SmartNA-X username and password (see
• a modern web browser (Internet Explorer 8.0+, Firefox, Chrome, Safari) supporting Java™ 1.5 (or later). If you
are having issues with logging into the web UI on Mac OSX, see the
section on page 216
Start your Java-enabled web browser and enter https://<SmartNA-X_address>. Enter your SmartNA-X username
and password and click Log in to login to the system. When you have finished working in the web UI, logout to
allow access to other users of the system.
Figure 3-5 Logging to the SmartNA-X web interface
Logging in to the CLI
To log in to the SmartNA-X CLI as Administrator, you'll need:
• network access to the SmartNA-X Management/Network port (default IP: 192.168.254.100)
• a SmartNA-X admin username and password (see
S NA-X
MART
Access details
Full read-write access.
Default username: admin
Default password: admin
Read-write access to ports and modules only.
Default username: user
Default password: user
Read-only access.
Default username: audit
Default password: audit
(Figure 3-5), you'll need:
Table 3-1
for troubleshooting information.
DRAFT
S NA™ 10G N
MART ETWORK
for the defaults)
"Resolving web UI issues on Mac OSX"
Table 3-1 for the defaults)
A (S NA-X)
CCESS MART
17