Reate Tacacs Accserver - Network Critical SmartNA-X User Manual

C L I R
OMMAND INE NTERFACE EFERENCE
C

REATE TACACS ACCSERVER

Use the create tacacs accserver command to add a TACACS+ accounting server and implicitly enable SmartNA-
X audit logging. Note that local audit logging is not available on SmartNA-X.
Command form create tacacs accserver <IP-addr> password]
IP-addr
password
Example Add a TACACS+ accounting server with the following properties:
• IP address: 192.168.10.25
• Password: qwaszx
CONTROLLER>create tacacs accserver 192.168.10.25 qwaszx
|
Specifies the network IP address of the TACACS+ accounting server.
(Optional) Specifies the password/shared-secret required to access the accounting
server. Passwords are case-sensitive.
Warning: If no password is specified, the shared-secret will be set as an empty string
("").
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
110