System Identity Tab - Network Critical SmartNA-X User Manual

W U -I R
EB SER NTERFACE EFERENCE

System identity tab

The System identity tab
options shown in
Figure B-1 The System identity tab
Table B-1 System identity tab options
Option
System name
System location
System contact
Use DHCP
System IPv4 address
IPv4 subnet
IPv4 gateway
DNS server
| S
YSTEM IDENTITY TAB
(Figure B-1) is available after clicking on the chassis. It provides access to the system
Table B-1, page 190.
Description
Sets the name of the appliance, as used by SNMP and elsewhere. Default: None.
The system's unique network identifier is displayed in the adjacent System MAC address field, together
with the IPv6 link-local address in the System link local-address field.
Sets the location of the appliance, as used by SNMP and elsewhere. Default: None.
Sets the system contact name, as used by SNMP and elsewhere. Default: None.
Enables or disables DHCP. Default: Disabled (recommended).
The current active status of this setting on the system is displayed in the adjacent Active DHCP setting
field.
Sets the device network interface IPv4 address. Default: 192.168.254.100.
The current active address is shown in the adjacent Active IPv4 address field.
Sets the device IPv4 subnet mask. Default: 255.255.255.0.
The current active subnet mask is shown in the adjacent Active IPv4 subnet field.
Sets the IPv4 network gateway address.
The current active gateway address is shown in the adjacent Active IPv4 gateway field.
Sets the address of the DNS server. Default: None
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
190