Reate Tacacs Authserver - Network Critical SmartNA-X User Manual

C L I R
OMMAND INE NTERFACE EFERENCE
C

REATE TACACS AUTHSERVER

Use the create tacacs authserver command to add a TACACS+ authentication server. You must use also the set
authentication tacacs command to enable TACACS+ server authentication. If your network has more than one
TACACS+ authentication server running, you can add them as backup/failover servers and the system will attempt
to contact the second server in order to validate a user if the account is not present or the secrets mismatch on the
first server.
Command form create tacacs authserver <IP-addr> password]
IP-addr
password
Example Add a TACACS+ authentication server with the following properties:
IP address: 192.168.10.24
Password: qwaszx
CONTROLLER>create tacacs authserver 192.168.10.24 qwaszx
|
Specifies the network IP address of the TACACS+ authentication server.
(Optional) Specifies the password/shared-secret required to access the authentication
server. Passwords are case-sensitive.
Warning: If no password is specified, the shared-secret will be set as an empty string
("").
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
106