Network Critical SmartNA-X User Manual page 27

A S NA-X | L
DMINISTERING MART
NOTE: The web UI (and CLI) support single user access only. Make sure there are no other users logged in before
attempting to access the web UI/CLI interface.
Figure 4-1 SmartNA-X Management/Network port
Logging in to the web UI
Enter the SmartNA-X network address in a web browser. For example:
1.
https://192.168.254.100
https://[2001:db8:1234::8a2e:370:fe56:dec4] (note the brackets).
We recommend using DNS for resolving IPv6 host names.
Enter your SmartNA-X account details and then click Log in.
2.
For information on using the web UI, see
Logging in to the CLI
To access the command line interface (CLI) use a terminal client which supports Secure Shell (SSH). To log in to
the CLI, follow these steps:
SSH to the SmartNA-X CLI:
1.
user@example.com ~# ssh admin@192.168.254.100
If prompted, enter "yes" to continue connecting (you won't need to do this a second time from this host):
2.
The authenticity of host '192.168.254.100' can't be established.
RSA key fingerprint is 9a:30:7b:95:ec:b4:fe:53:e1:a4:42:69:4f:15:5c:1a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.254.100' (RSA) to the list of known hosts.
Enter your SmartNA-X password:
3.
admin@192.168.254.100's password:*****
CONTROLLER>
When you have finished entering commands in the CLI exit to allow access to other users:
4.
CONTROLLER>exit
Exiting CLI
Connection to 192.168.254.100 closed.
user@example.com ~#
OGGING IN
S NA™ 10G N
MART
MANAGEMENT/NETWORK PORT
Chapter 5,"Using the Web User
DRAFT
A (S
ETWORK CCESS MART
Interface".
NA-X)
22