Snmp Tab - Network Critical SmartNA-X User Manual

W U -I R
EB SER NTERFACE EFERENCE

SNMP tab

The SNMP tab
client settings shown in the tables below.
Figure B-4 The SNMP tab
Table B-3 SNMP tab options
Option
SNMP enabled
Engine ID
Send notifications
Configure notification
hosts
Configure communities Options for configuring traditional SNMP v1, v2c communities. See
Configure users
Configure communities
(VACM)
Configure groups
| SNMP
TAB
(Figure B-4) is available after clicking on the chassis. It provides access to the SNMP options and
Description
Enables or disabled the SNMP agent. Default: Disabled.
The SNMP engine ID identifies the agent in the device and is a security feature of SNMPv3. The engine
ID is automatically generated by the system and is a product of the enterprise number of Network Critical
(by IANA) and the MAC address of the 'eth0' interface, thus it is not user configurable.
Allows notifications to be sent for the following system alerts:
Health – power, fan, TAP module temperature, system temperature
SNMP – cold start, warm start, authentication failure
System – link up/down, module in/out, traffic overload/underload
Options for configuring notification host servers. See
Options for configuring view-based users. See
Options for configuring view-based access communities (SNMPv3). See
Options for configuring view-based groups. See
S NA™ 10G N
MART
Table B-4
Table B-6.
Table B-8.
DRAFT
A (S
ETWORK CCESS MART
for available options.
Table B-5.
Table B-7
NA-X)
195