Elete Radius Authserver - Network Critical SmartNA-X User Manual

C L I R
OMMAND INE NTERFACE EFERENCE
D

ELETE RADIUS AUTHSERVER

Use the delete RADIUS authserver command to remove access to a RADIUS authentication server. Note that
users will not be able to access SmartNA-X unless local authentication is enabled (set authentication local) or
another authentication server is added (create radius authserver).
Command form delete RADIUS authserver IP-addr
IP-addr
Example Delete RADIUS authentication server 192.168.10.22:
CONTROLLER>delete radius authserver 192.168.10.22
removing RADIUS server
|
Specifies the network IP address of the RADIUS authentication server.
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
105