Network Critical SmartNA-X User Manual page 148

C L I R
OMMAND INE NTERFACE EFERENCE
|
[ prt-value] (Optional) Filters on the specified value matching the source port
port src
number. For prt-value, the following formats are recognized:
• 10 – A single port
• 10-20 – A range (inclusive)
• 10,15 – Multiple ports (multiple ports may each use a range). Use commas (no
spaces) to separate ports.
[ prt-value] (Optional) Filters on the specified value matching the
port dest
destination port number.
[ prt-value] (Optional) Filters on the specified value matching either the
port either
source port number or the destination port number.
[ add-value] (Optional) Filters on the specified value matching the IP
address src
source address. You may give either a single specification, to find packets where
either the source or the destination address matches, or separate specifications for
source and/or destination address. The following formats are recognized in each
case:
2000:abcd:0:0:0:0:77:88 – A single address
2000:abcd::77:88 – A single address (eliding a single run of zero segments)
2000:abcd::77:88-99 – A range address (inclusive)
::ffff:0:0/96 – Prefix (any address starting 0:0:0:0:0:ffff )
2000::1,2000::3 – Multiple addresses. Use commas (no spaces) to separate
addresses.
Ranges may be used in any segment.
Multiple addresses may each use ranges or prefix notation.
[ add-value] (Optional) Filters on the specified value matching the IP
address dest
destination address.
[ add-value] (Optional) Filters on the specified value matching either
address either
the IP source or destination address.
S NA™ 10G N
MART
DRAFT
A (S NA-X)
ETWORK CCESS MART
143