Network Critical SmartNA-X User Manual page 160

C L I R
OMMAND INE NTERFACE EFERENCE
SNMP /
AGENT
Use the snmp agent command to enable and disable the SNMP agent, or to show the agent's current status. The
agent must be enabled to expose management data and send notifications.
SNMP SNMPv1, SNMPv2c, SNMPv3
Command form snmp {show
set snmp {
show snmp
show
{ |
on off
Examples • Show status of the SNMP agent:
CONTROLLER>snmp show agent
SNMP : Disabled
• Enable the SNMP agent:
CONTROLLER>snmp enable agent
CONTROLLER>snmp show agent
SNMP : Enabled
|
SNMP /
SET SHOW
| enable | disable} agent
| }
on off
| enable | disable Use
show
to enable the SNMP agent. Use
} Use to enable SNMP. Use
on
S NA™ 10G N
MART
SMNP
to show the current enabled or disabled state the SNMP agent. Use
disable
to disable SNMP.
off
DRAFT
A (S
ETWORK CCESS
to disable the SNMP agent.
NA-X)
MART
enable
155