Elete Tacacs Authserver - Network Critical SmartNA-X User Manual

S NA™ 10G N A (S NA-X)
MART ETWORK CCESS MART
C L I R |
OMMAND INE NTERFACE EFERENCE
D

ELETE TACACS AUTHSERVER

Use the delete tacacs authserver command to remove access to a TACACS+ authentication server. Note that users
will not be able to access SmartNA-X unless local authentication is enabled (set authentication local) or another
authentication server is added (create tacacs authserver).
Command form delete tacacs authserver IP-addr
IP-addr Specifies the network address of the TACACS+ authentication server.
Example Delete TACACS+ authentication server 192.168.10.24:
CONTROLLER>delete tacacs authserver 192.168.10.24
DRAFT
107