Network Critical SmartNA-X User Manual page 190

C L I R
OMMAND INE NTERFACE EFERENCE
SNMP
DELETE ACCESS
Use the snmp delete access command to delete the specified access group.
SNMP SNMPv3
Command form snmp delete access group-name {
{write-viewname} {notify-viewname}
group-name
{ |
any
noAuth
read-viewname
write-viewname
notify-viewname
Example Delete the access group named group2 with any SNMPv1/v2c and USM security and no authorization security:
CONTROLLER>snmp delete access group2 any noAuth
|
|
any
Specifies the name of the group.
| | } Specifies the security model. Since the same group can have multiple access
usm v1 v2c
commands defined, each with a different security model, this limits deletion to the
group with the specified security model, or all models if
| | } Specifies the security model. Since the same group can have multiple access
auth priv
commands defined, each with a different see model, this limits deletion to the group
with the specified security level.
Specifies the view to which get requests are mapped.
Specifies the view to which set requests are mapped.
Specifies the view to which notify requests are mapped.
S NA™ 10G N
MART
| | } { |
usm v1 v2c noAuth auth
DRAFT
A
ETWORK CCESS
| } {read-viewname}
priv
is specified.
all
(S NA-X)
MART
185