Table of Contents
Advertisement
4 Paper and Other Media
Loading Paper
The following describes how to load paper in Trays 1 to 4 and Tray 5 (bypass).
Loading Paper in Trays 1 to 4
The following describes the procedures to load paper in Trays 1 to 4.
When the machine runs out of paper during copying or printing, a message appears on the
touch screen. Add paper according to the message instructions. Copying or printing
automatically resumes when paper is added.
Important • Do not place any objects other than paper in the trays.
Note
1
Pull out the tray until it stops.
4
Important • While the machine is processing a job, do not pull out the tray that is being used for a job.
2
Load and align the edge of the paper against the left edge of the tray, with the side to be
copied or printed on facing up.
82
• Trays 2 to 4are optional for some models.
• Carefully fan paper before loading it in a tray. Otherwise, the paper may stick together, resulting in
paper jams.
• To prevent paper jams or erroneous detection of loaded paper in a tray by the machine, do not add
paper on top of any remaining paper in the tray. Remove any remaining paper in the tray, and then
load that paper on top of the newly loaded paper.
• Do not pull out all the trays together. Otherwise, the machine gets inclined and turns over, which may
cause injuries.
Advertisement
Table of Contents
