Call Setup Rules Parameters; Http-Based Services - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
Cost Group > Time Band
Table
[CostGroupTimebands]

58.14.4 Call Setup Rules Parameters

The Call Setup Rules parameters are described in the table below.
Parameter
Call Setup Rules
[CallSetupRules]

58.14.5 HTTP-based Services

The HTTP-based service parameters are described in the table below.
Parameter
HTTP Remote Services
[HTTPRemoteServices]
Version 7.0
CostGroupTable_DefaultMinuteCost;
[ \CostGroupTable ]
For example: CostGroupTable 2 = "Local Calls", 2, 1;
For a description of the table, see ''Configuring Cost Groups'' on page
275.
Defines time bands and associates them with Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands]
For a description of the table, see ''Configuring Time Bands for Cost
Groups'' on page 276.
Table 58-78: Call Setup Rules Parameters
Defines Call Setup Rules that the device runs at call setup for LDAP-
based routing and other advanced routing logic requirements including
manipulation.
[ CallSetupRules ]
FORMAT CallSetupRules_Index = CallSetupRules_RulesSetID,
CallSetupRules_AttributesToQuery, CallSetupRules_AttributesToGet,
CallSetupRules_RowRole, CallSetupRules_Condition,
CallSetupRules_ActionSubject, CallSetupRules_ActionType,
CallSetupRules_ActionValue;
[ \CallSetupRules ]
For a description of the table, see ''Configuring Call Setup Rules'' on
page 287.
Table 58-79: HTTP-based Service Parameters
Defines HTTP-based services.
The format of the ini file table parameter is as follows:
[HTTPRemoteServices]
FORMAT HTTPRemoteServices_Index =
HTTPRemoteServices_Name, HTTPRemoteServices_Path,
HTTPRemoteServices_HTTPType, HTTPRemoteServices_Policy,
1059
58. Configuration Parameters Reference
Description
Description
Description
Mediant 3000