System Configuration Commands - Comtech EF Data SDM-309B Installation And Operation Manual

Remote Control
4.3.20 Bulk Insert Channels Assignment
Command:
Response:
Status Only:
Response:
Notes: The status response returns progamming information for 1 to N insert channels.
Time slot 16 (cc = 16) may not be specified when the insert data format is specified to be
E1CAS. This command is not valid if the insert data format is specified to be T1IBS or
E1IBS. Also this command is not valid when the insert data format is specified as
E1CAS and the demodulator data rate is set to 1920.0Kbps.

4.4 System Configuration Commands

4.4.1 Time Of Day
Command:
Response:
Status Only:
Response:
Example: Set modem 67 time to 10:45PM.
Command:
Response:
4.4.2 Date
Command:
Response:
Status Only:
Response:
Example: Set modem 235 date to 11/30/87.
Command:
Response:
B-B–14
<add/BICA_ii;cc_ii;cc_ii;cc_ii;cc......"cr"
>add/BICA_ii;cc_ii;cc_ii;cc_ii;cc......"cr""lf"]
ii = 1 to N, (over the satellite insert channel)
where N = (Modulator Data Rate) divided by (64Kbps).
cc = 1 to 24 (terrestrial channel number for T1 data formats).
cc = 1 to 31 (terrestrial time slot number for E1 data formats).
cc = 0 if no insert is desired for the specified insert channel.
<add/BICA_"cr"
>add/BICA_ii;cc_ii;cc_ii;cc_ii;cc......"cr""lf"]
<add/TIME_hh:mmxx"cr"
>add/TIME_hh:mmxx"cr""lf"]
<add/TIME_"cr"
>add/TIME_hh:mmxx"cr""lf"]
<67/TIME_10:45PM"cr"
>67/TIME_10:45PM"cr""lf"]
<add/DATE_mm/dd/yy"cr"
>add/DATE_mm/dd/yy"cr""lf"] yy = year)
<add/DATE_"cr"
>add/DATE_mm/dd/yy"cr""lf"]
<235/DATE_11/30/87"cr"
>235/DATE_11/30/87"cr""lf"]
SDM-309B Satellite Modem
(hh = hours, mm = minutes,
xx = AM or PM)
(mm = month, dd = day, and
MN/U-SDM309B Rev. #