Positioning The No. 1/2 Mirror Base - Canon iR5000i Service Manual

When mounting the reader up-
per frame, be sure to go through
the following steps:
1) Fit the ten claws [1] of the reader frame
correctly into the cut-offs in the reader
upper frame.
2) Secure the positions [2] of the six left/
right claws using screws.
3) Fit the two screws [3] at the end.

6.2.3 Positioning the No. 1/2 Mirror Base

1) Set the pins of the mirror position tool
as indicated.
Initial FY9-3009 configuration
(for rear)
[A]
Initial FY9-3009 configuration
(for front)
COPYRIGHT © 2001 CANON INC.
[C]
[B]
[A]
[C]
[B]
F02-602-07
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 2 ORIGINAL EXPOSURE SYSTEM
[1]
[1]
[A]
[C]
Configuration used for the machine
(for rear)
[A]
[C]
[B]
Configuration used for the machine
(for front)
[2]
[1]
[1]
[3]
[1]
F02-602-06
[B]
[1]
2-23 R