Batches - Activant Dimensions Getting Started

Batches

The batch process is used in most data entry tasks (A/R cash receipts, A/P invoice
entry, payroll processing, inventory physical count, inventory adjustments, etc.).
Batch processing allows you to enter a group of entries into a batch, check the
entries for accuracy, edit the batch if necessary, and then update the batch to the
appropriate file(s). Depending on the type of data you are entering, this would be
done on a regular basis. For example, cash receipts would probably be entered
daily.
The following procedures are alike for all kinds of batches.
1 Identify the Batch
After selecting a batch entry process such as entering A/P invoices, the computer
asks:
1. Batch Identification : AP___________
Depending on the task, the computer fills in the appropriate prefix to the batch
I.D. In this case, A/P invoice batches always begin with "AP" so the computer
displays "AP________". Then you can enter the batch I.D. It can be up to 10
characters long, including the 2-character prefix. The most common method of
naming batches is to use the date (month and day) and the operator's initials. For
example, if a batch was being entered on May 1 by Ann Smith, enter 0501AS.
Notice that leading zeroes are used to make the date a full 4 characters. You can
use this method of identifying batches or devise your own scheme but you should
try to make them consistent, understandable, and easy for others to interpret.
2 Calendar Month
After entering the batch I.D., check the displayed calendar month and period code.
All entries in this batch will be posted to this G/L accounting period. Change if
necessary. (Enter 2 and press Enter. Then enter the correct calendar month, not
the fiscal month. The computer will then show the fiscal period.)
3 Store Number
Check the displayed store number. If you need to change it, enter the number for
Change Store No
4 Date
Check the date as displayed in the upper right hand corner of the screen. All the
entries in this batch will be assigned this date. Change if necessary. Enter the
number for
standard date format (mmddyy).
Dimensions 14
NOTE: After entering the batch I.D., the computer displays "OLD" or "NEW". An "old" batch has
entries in it which have not been updated. Unless you are adding to an old batch, you
should be careful to complete an old batch by updating and printing the reports before
entering a new batch.
and press Enter. Then enter the correct store number.
and press Enter. Then enter the correct date in the
Change Date
Chapter 2. System Training
45