Activant Dimensions Getting Started page 478

Appendix D
Then you will have these added options:
C
V
D
8 When you are done selecting fields, you can either press Enter through the
remaining fields or enter "." (period) and Enter.
9 You are returned to
Esc. You are returned to the previous menu.
10 Repeat for option 2,
470
Make this field changeable, viewable, with a default value
that you enter next when the computer asks
This default value will be used for all customers being added
unless it is changed at the time of entering the customer. For
example, you can set up field
of 1 to assign all customers to store 1. It can be changed at
the time of entering customers.
Make this field not changeable, viewable, with a default value
that you enter next when the computer asks
This default value will be used for all customers being added
and cannot be changed at the time of entering the customer.
For example, you can set up field
value of Y to require all customers to have a PO number. It
can be changed only in
customer if needed.
Make this field not changeable, not viewable, with a default
value that you enter next when the computer asks
. This default value will be used for all customers being
Value
added and will not be displayed at the time of entering the
customer. For example, you can set up field
a default value of 1 to put all customers in A/R group 1. It
can be changed only in
customer if needed.
1. Enter Password Account
Add/Maintain CM2 Fields
Enter Default Value
with a default value
19. STORE NO
Enter Default Value
with a default
14. PO REQ
later for a specific
A/R File Maintenance
10. AR GROUP
later for a specific
A/R File Maintenance
. To end this procedure, press
.
.
.
Enter Default
with
Dimensions 14