Activant Dimensions Getting Started page 191

The cursor is positioned at the bottom of the screen. You can do one of the
following:
N=Next
P=Previous
F=Change By Field
C=Change
Esc=First Screen
6
F=Change By Field
Enter Field Number
Enter the field number you wish to change. For example if you want to change
the unit description, enter 7.
7 The cursor moves to the selected field. Enter the new value for this field and
press Enter.
8 Repeat Steps 6 and 7, entering field numbers and new values as many times as
needed.
9 When done, press Esc at
10 The computer asks:
OK To Save Changes (Y/N)
Enter Y to save the changes you made or N to not save them.
11 Return to Step 5 to select another option.
12
C=Change
and press Enter to move to the next field. Or press Tab to go to the next field
without changing the value.
CAUTION:
13 Continue changing fields as needed for this item. When done, you can press Tab
through the remaining fields or enter . (period) and press Enter to bypass the
remaining fields and go to Step 14.
14 The computer asks:
OK To Save Changes (Y/N)
Enter Y to save the changes you made or N to not save them.
15 Return to Step 5 to select another option.
Dimensions 14
Display the next item in numerical order.
Display the previous item in numerical order.
Select and change specific fields for the displayed item.
See Steps 6-11.
Change all fields for the displayed item. See Steps 12-15.
Return to the previous screen to select another item or
end this process.
. The computer asks:
Enter Field Number
. The cursor moves to field 5,
Do not press Enter to move to the next field. This will erase the existing value in the
current field.
.
. Enter the new value for this field
Mfg Name
Chapter 5. Inventory
183