Chart Language; Course Up/North Up - Standard Horizon CPN1010i Owner's Manual

The color of the arrow denotes the strength of the current as follows:
When the CPN Series Chart Plotter receives a valid position fix, the Tide icons are shown
on the charts on the basis of the current date and time: the screen displays and changes
arrows as date/time changes.
It is possible to see the variation of the Tidal arrows on the selected area at any given time.
To activate this function follow the procedure:
1. Press the
2. Tap on DISPLAY. The Chart Display menu appears.
3. Turn the Rotary Knob to select CURRENTS PREDICTION.
4. Tap on CURRENTS PREDICTION.
5. Tap on the
/ Soft Keys to increase/decrease time; tap on the

Chart Language

The CPN Series Chart Plotter may be customized to show the local language of the chart.
To select the Chart Language you want:
1. Press the
2. Tap on DISPLAY. The Chart Display menu appears.
3. Turn the Rotary Knob to select CHART LANGUAGE.
4. Tap on CHART LANGUAGE. A new window will appear with available functions
described in the table.
Language : Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (data cartridge or embedded charts).
Mode : Defines how objects are translated. Selections are:
5. Tap on to exit to the Chart Page.
a. When the Chart Language is changed, the following settings are automatically selected: MODE is set
to Off and Chart Language is set to your selection.
b. If the SD CARD is removed or changed, the Chart Language should be confirmed and changed if
necessary.

Course Up/North Up

The default selection is North Up: the chart is shown with North toward the top of the display.
Also it is possible to select Course Up: the top of the Chart Page orientated so it always
shows the area ahead of the direction your vessel is travelling.
CPN700i and CPN1010i Multimedia Chart Plotters
key, tap on Setup Menu.
Soft Key to set the date and time manually, and on the
key, tap on Setup Menu.
Off : Enables the language chosen in the Language menu above. If the selected
language is not present on the objects information, English is used.
English : Always uses English.
Local : Uses the Local language present on C-MAP B
language is available, English is used.
Soft Key to exit.
J SD CARD. If no Local
Y EPPESEN
Page 57