Chart Plotter; Getting Started - Standard Horizon CPN1010i Owner's Manual
Multimedia gps chart plotters
Hide thumbs
Also See for CPN1010i:
- Owner's manual (188 pages) ,
- Operation manual (32 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
CHART PLOTTER
GETTING STARTED
This section takes you through the most frequently used operations and shows how to
customize the appearance of the CPN Series Chart Plotter.
1. Press the
PWR key until the display shows the Splash Screen page (see A). In case
of error messages please refer to System Update Error Messages paragraph.
2. After about 1 minute the Splash Screen will change to show the Start Up Screen (see B).
This page allows you to select the Chart Plotter, Connection Manager, Internet Browser
or Multimedia modes.
3. To select the Chart Plotter mode, tap on the Plotter Icon
The CPN Series Chart Plotter will automatically change to Chart Plotter Mode if a key
or display is not touched for 30 seconds.
4. The Splash Screen page (see A) is shown again before the Warning page appears (see C).
Move the
ShuttlePoint Knob down or touch underneath the scroll bar to read the
CPN700i and CPN1010i Multimedia Chart Plotters
.
Page 25
Advertisement
Table of Contents
