Creating An Olympic Route Or Boundary; Making Additional Routes - Standard Horizon CPN1010i Owner's Manual

3. Tap on
name; when finished tap on
4. Press the

CREATING AN OLYMPIC ROUTE OR BOUNDARY

This feature allows the starting point in a Route to be saved as the final destination point.
1. On the Chart Page move the
of the starting Waypoint in the Route.
2. Press the
3. Move the ShuttlePoint Knob or touch the screen to the second Lat/Lon of the next
leg in the Route.
4. Press the
starting Waypoint to the second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route (see A).
6. Then move the
7. Tap on the
(see B and C).

MAKING ADDITIONAL ROUTES

To create another Route the CPN Series Chart Plotter must be told that you want to create
a second Route.
1. Move the ShuttlePoint Knob or touch the screen over the top of one of the Waypoints
in a Route and tap on the
2. Tap on
3. Tap on an open Route number (example, Route 2).
CPN700i and CPN1010i Multimedia Chart Plotters
. The touchscreen keyboard appears. Insert the desired Route
, the keyboard disappears.
key to show the Chart Page.
ShuttlePoint Knob or touch the screen to the Lat/Lon
key, the starting Waypoint will be placed under the cursor.
key. Another Waypoint is shown under the cursor and a line joins the
ShuttlePoint Knob or touch the screen to the last Waypoint.
Soft Key. A line joins the starting Waypoint and the last Waypoint
.
Soft Key. The Edit Route page will be shown.
Page 67