Gps Status Page; Setup Menu - Standard Horizon CPN1010i Owner's Manual

GPS Status Page

This page is used as a reference to see how well the GPS is receiving satellites.
1. Press the
2. Tap on GPS. The GPS Status Page appears. Data Boxes can be customized, except
for Latitude, Longitude and GPS Status.
The WAAS/GPS Icon Area
ACQUIRING : the GPS is trying to receive a valid position fix.
GPS2D : The GPS is receiving at least 2 valid Satellites.
GPS3D : the GPS is receiving at least 3 Satellites.
WAAS 2D/3D : the GPS is receiving a 2D or 3D position and the correction from the WAAS Satellite.

Setup Menu

From this page it is possible to activate the GPS Setup menu following this procedure:
1.
Firstly a tap anywhere on the screen for the Soft Keys to appear is needed (they are not
displayed on the page by default and permanently). Then tapping on the
Soft Key brings up the GPS Setup menu*.
GPS Source
Restart GPS
Navigation Speed
Speed Filter
Page 94
key, tap on Navigation.
may change due to the satellite reception:
: Allows setting the GPS Source among Internal Antenna, External Antenna and
Second CPN. The default setting is Internal Antenna.
: Restarts all GPS processes. Once executed, the message "Done" is shown.
: Allows setting the Navigation Speed (SOG update) among Low and High. The default
setting is High.
: Allows to resolve erratic speed readings in rough seas. Available values are Off, Low,
Medium, High. The default setting is Off.
See the following table:
Owner's Manual