Formatting The Sd Card; Transferring Files To The Sd Card - Standard Horizon CPN1010i Owner's Manual

another.
The information shown below will assist you to transfer the User Points, Routes and Track
history to the SD CARD.

FORMATTING THE SD CARD

If there is a C-MAP 4D CARD inserted into the slot, before formatting procedure, please safely remove
it using the following steps:
1. Press the
2. Tap on the right arrow next to ADVANCED Desktop icon two times to display ABOUT and tap on it.
3. Tap anywhere in the About Page to display Soft Keys.
4. Tap on the
the cartridge from the slot.
5. Tap on
6. Open the door, gently remove the SD CARD from the slot.
7. Press the
1. Open the SD CARD door and insert a optional SD CARD.
2. Press the
3. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
4. Tap on USER CARD. The USER SD CARD page appears.
5. Tap on the
6. A Warning window appears to confirm you want to format the SD CARD.
7. Tap on to confirm (or press the
SD CARD to receive and store information.
8. Tap on to confirm.
Formatting permanently erases all files previously saved on the SD CARD.

TRANSFERRING FILES TO THE SD CARD

1. Insert the SD CARD into the slot.
2. Press the
3. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
4. Tap on USER CARD. The USER SD CARD page appears.
5. Tap on the
CPN700i and CPN1010i Multimedia Chart Plotters
key, tap on Setup Menu.
Soft Key. A message is shown for informing you that it is possible to remove
in the popup window, then on
key repeatedly to exit.
key, tap on User Points.
Soft Key.
key, tap on User Points.
Soft Key.
on the next window.
key). The format of SD CARD prepares the
Page 81