Chart Language; Pictures & Diagrams - Standard Horizon CP500 Owner's Manual

number in the Time.
e. To select the next number in the Time field, move the ShuttlePoint knob to the right
and repeat step a. until the time is shown.
f. To store the Time, press [ENT] and Speed (SPD) and Direction (DIR) will be
updated in the table.
6. Press [E ].
XIT
6.0.8

Chart Language

The CP500 may be customized to show the local language of the chart. To select the Chart
Language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART LANGUAGE and press [ENT] or move
the ShuttlePoint knob to the right. A new popup window will appear on the screen. The
available functions are described in the table below.
Language : Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (data cartridge or embedded charts).
Mode : Defines how objects are translated. Selections are:
4. After the selection is made, press [CLR] repeatedly or move the ShuttlePoint knob to
the left repeatedly until the Chart page is shown.
a. When the Chart Language is changed, the following settings are automatically selected: MODE
is set to Off and Chart Language is set to your selection.
b. If the C-CARD is removed or changed, the Chart Language should be confirmed and changed
if necessary.
6.0.9 Pictures & Diagrams
Using optional C-MAP
on the CP500 display. These Pictures are typically used to facilitate the identification of
cartographic objects or places around the chart: they can be the landscape layout nearby
a harbor, the shape of a bridge or of a buoy etc. On some objects, such as bridges, the image
associated can represent the Diagram representing the shape of the objects and the various
characteristics (length, height, type of bridge etc.).
Page 50
Off : Enables the language chosen in the Language menu above. If the selected
language is not present on the objects information, English is used.
English : Always uses English.
Local : Uses the Local language present on C-MAP B
language is available, English is used.
MAX C-CARDs allows you to show pictures or diagrams
B J
Y EPPESEN
Figure 6.0.9 - Pictures & Diagrams
NOTE
J C-CARD. If no Local
Y EPPESEN
CP500