Creating A Route Using Marks On The Chart Page; Inserting A Waypoint Into A Route - Standard Horizon CPN1010i Owner's Manual

4. Press the
5. To create the new Route, follow now the steps in the previous section "Creating a Route
using Waypoints".

CREATING A ROUTE USING MARKS ON THE CHART PAGE

To create a Route containing Marks you first must create the Marks and show them on the
Chart Page.
1. Move the ShuttlePoint Knob over the top of a Mark that you wish to be the starting
point in the Route and press the
2. Next move the
be the next leg in the Route.
3. Press the
means these Marks are selected into the Route.
4. Repeat steps 3 and 4 until all Marks are entered into the Route.
You can touch the Mark on the display instead of using the

INSERTING A WAYPOINT INTO A ROUTE

1. Touch or move the
and tap on the
Page 68
key.
ShuttlePoint Knob until the cursor is over the Mark that you want to
key. You will notice a bearing line joins the first and second Mark which
ShuttlePoint Knob to the navigation line between two Waypoints
Soft Key (see A).
key.
ShuttlePoint Knob.
Owner's Manual