Underwater Objects Settings; Navigation Pages; Highway Page - Standard Horizon CPN1010i Owner's Manual

VAD Boundaries : Turns the Value Added Data Boundaries On or Off. The Value Added Data (VAD) is a collection
of additional cartographic objects which are not present on the original paper chart. These objects
have been obtained from other sources and then merged to the C-MAP 4D charts in order to
provide more information useful for the navigation.
Chart Lock : Turns the chart function On/Off. When Chart Lock is On, the available zoom scales are only the
ones containing cartographic data. Instead when Chart Lock is Off, it is possible to zoom down
into zoom scales not covered by cartographic data. The Safety Status Bar DSI (Data Safety
Indicator) window, if present, will show "NO CHART", when the CPN Series Chart Plotter is
zoomed into a chart level which does not contain cartographic data.

Underwater Objects Settings

The following selections are used to control which Underwater Objects are shown on the
Chart Page.
Underwater Object Limit
Rocks
Obstructions
Diffusers
Wrecks
1 The Underwater Objects shown on the chart display could be up to 3 Ft deeper than the entered value
to guarantee a safety tolerance margin.
2
Selections: ICON (the object icon is visible, in the range selected from "Underwater Object Depth Limit"
option); ICON+DEPTH (the object icon and the depth are visible, in the range selected from "Underwater
Object Depth Limit" option).

NAVIGATION PAGES

Pages contained on the Navigation Desktop are useful for navigating to a Waypoint or
viewing the status of GPS signals.
1. Press the
appear: HIGHWAY opens the Highway Page, COMPASS opens the Compass Page and
GPS opens the GPS Status Page.

Highway Page

Shows a 3D Highway view of the vessel travelling through the water only when navigating
Page 92
1
: Selects the max depth value to display Underwater Objects. If value is set to 0 Ft, the Underwater
Objects are not shown on the chart display. If the depth value is set more than 0 Ft (i.e. 10 Ft),
depth information will be shown on the chart display from 0 Ft to the selected depth.
: Sets Icon/Icon+Depth
:
Sets Icon/Icon+Depth
:
Sets Icon/Icon+Depth
top of a submerged pipe that helps diffuse material into the water, i.e. discharge or
wastewater and can be an obstruction to navigation).
:
Sets Icon/Icon+Depth
key, tap on Navigation. In the bottom of the page the available selections
2
the displaying of the Rocks.
2
the displaying of the Obstructions.
2
the displaying of Diffusers
2
the displaying of Wrecks.
(a Diffuser is a structure usually found on
Owner's Manual