CONNECTION MANAGER
GETTING STARTED
The Getting Started section will take you through frequently used operations using the
Connection Manager. The Connection Manager allows you to connect to a Wi-Fi
and to share information between two CPN Series Chart Plotters.
STARTING THE CONNECTION MANAGER
There are two ways to access the Connection Manager, follow the procedure below:
From the Chart Plotter Mode
1. Press and hold the
2. Tap on
From the Start Up Page
1. Turn on the CPN Series Chart Plotter.
2. When the Start Up display is shown, tap on the Connect Icon
Page 112
PWR key until the display shows the window below:
to display the Start Up screen.
®
Hot spot
(see A).
Owner's Manual