Creating/Modify A New Mark In The User Points List - Standard Horizon CPN1010i Owner's Manual

Allows deleting the selected point. Tap on
Allows deleting all stored points. Tap on
Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences.
A information window appears after sending completed. Tap on
When selected, receives points from an external device (PC) that is capable of sending NMEA WPL sentence.
A information window appears after receiving completed. Tap on
The SEND and RECEIVE functions are usually used by navigation programs running on a PC.

CREATING/MODIFY A NEW MARK IN THE USER POINTS LIST

This function is very useful if you have a list of Marks that you want to enter into the CPN Series Chart
Plotter.
1. Press the
2. Tap on MARKS. The Marks/Waypoints List page will be shown.
3. To create a New Mark, tap on
4. Tap on
5. Press the Rotary Knob
6. Tap on the desired Mark Icon (see C). The Mark Icons window disappears.
7. Turn the Rotary Knob to the right to select the Mark Name field and press the
Rotary Knob. The touchscreen keyboard appears. Insert the desired name (see D);
when finished tap on
8. Turn the Rotary Knob to the right to select the Latitude/Longitude field and press the
Rotary Knob. Again the touchscreen keyboard appears. Insert the desired coordi-
nates; when finished tap on
Page 64
key, tap on User Points.
. The Mark Icon appears selected (see B).
1 . The Mark Icons popup window appears.
, the keyboard disappears.
, the keyboard disappears.
to confirm.
to confirm.
. A row is added (see A).
to confirm.
to confirm.
Owner's Manual