Waas/Egnos Setting; Nmea Data Pages; Nmea Display Page - Standard Horizon CPN1010i Owner's Manual

Diff Correction Source
2. Tap on the preferred item.
3. Press the
* The GPS Setup menu changes depending if the internal or external GPS is detected and switched on,
and also can be different depending on the type of the external GPS used.

WAAS/EGNOS Setting

From the GPS Status page it is possible to disable the WAAS/EGNOS setting following this
procedure:
1. Tap anywhere on the screen and then tap on the
menu appears.
2. Tap on DIFF CORRECTION SOURCE to select None (to disable).
3. Press the

NMEA DATA PAGES

1. Press the
appear: DISPLAY and DATA.

NMEA Display Page

The CPN Series Chart Plotter is capable of displaying information in the customizable data
windows from external NMEA 0183 devices. Depth sounder, Speed Log with temp, Wind
speed and direction, Flux gate compass, and GPS information can be shown in any of the
boxes. The NMEA sentences read from external devices are: BWC, DSC, DSE, GGA, GLL,
GSA, GSV, HDG, HDM, HDT, RMC, VHW, VTG, DPT, DBT, MTW, VWR, VWT, TLL, WPL,
RTE.
1. Press the
2. Tap on DISPLAY. The 5 NMEA pages can be displayed in circles, from 1 to 6 data boxes
pages. Each data box can be customized. The default NMEA Display shows 3 windows:
3. Move the ShuttlePoint Knob to the left/right to scroll through all NMEA pages,
otherwise tap anywhere on this page for the Soft Keys to appear, and then tap on the
desired Soft Key to select the NMEA Display Page you want, for example tap on the
Soft Key to open NMEA Display Page with six boxes. See the following picture.
CPN700i and CPN1010i Multimedia Chart Plotters
: Allows setting what kind of Differential Correction will be used by the GPS between
WAAS/EGNOS and None. The default setting is WAAS/EGNOS.
key to exit the menu.
key to exit the menu.
key, tap on NMEA. In the bottom of the page the available selections
key, tap on NMEA.
Soft Key: the GPS Setup
Page 95