Chart Language - Standard Horizon CP300i Owner's Manual

direction and strength of the Tide:
If no data/time is available from the GPS or the GPS Chart Plotter is not in Simulation
Mode, the icon on the chart is generic one. The color of the arrow denotes the strength
of the current as follows:
When the GPS Chart Plotter receives a valid position fix, the Tide icons are shown on the
charts on the basis of the current date and time: the screen displays and changes arrows
as date/time changes.
It is possible to see the variation of the Tidal arrows on the selected area at any given time.
To activate this function follow the procedure:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CURRENTS PREDICTION and press [ENT] or
move the ShuttlePoint knob to the right.
4. A window is shown on the low-left side of the chart. On the CP300/CP300i press [S
T ] to set the date and time manually, and [I
IME
increase time; press [E
and time manually, and [GOTO]/[MENU] to decrease/increase time; press [CLR] to
exit.
6.0.8

Chart Language

The CP180/CP180i and CP300/CP300i may be customized to show the local language of
the chart. To select the Chart Language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART LANGUAGE and press [ENT] or move
the ShuttlePoint knob to the right. A new popup window will appear on the screen. The
available functions are described in the following table.
GPS Chart Plotters
Figure 6.0.7 - Tidal stream arrows
Figure 6.0.7a - Tidal stream arrows table
] to exit. On the CP180/CP180i press [ENT] to set the date
XIT
. T ]/[D . T
NCR IME ECR
ET
] to decrease/
IME
Page 57