Fish Finder (Optional Ff525 Required); Tide Page; Tides - Standard Horizon CPN1010i Owner's Manual

4. To freeze the data on the display so it is easy to read and understand, press the
ShuttlePoint Knob or the
5. To unfreeze the data, the
6. View data from a device connected to another data port, tap anywhere on this page for
the Soft Keys to appear, and then tap on the
available ports will appear.

FISH FINDER (OPTIONAL FF525 REQUIRED)

The Fish Finder Icon and page selections may be accessed only when an optional FF525
is connected. After connection the following displays may be shown.
1. Press the
appear.
2. Tap on the right or left bottom arrow to scroll the Desktop Icons to display the desired
icon. From the left:
· FULL 200kHz opens the Fish Finder 200kHz Full page
· FULL 50kHz opens the Fish Finder 50kHz Full page
· 200kHz & CHART opens the Fish Finder 200kHz page on the right side and the Chart
page on the left
· 50kHz & CHART opens the Fish Finder 50kHz page on the right side and the Chart page
on the left
· DUAL opens the Fish Finder 200kHz page on the right side and the 50kHz page on the left
· ZOOM 200kHz opens the Fish Finder 200kHz Zoom page
· ZOOM 50kHz opens the Fish Finder 50kHz Zoom page
· AUTO opens the Fish Finder 50/200kHz Zoom page.
3. Tap on the desired display. See the example below. For basic connections refer to
Connections section. For detailed installation and connections refer to the manual
supplied with the FF525.

TIDE PAGE

1. Press the
TIDE and FIND.

Tides

The Tide Page contains Tide information critical for safe navigation. It is also useful for
boaters that are concerned about the height of the water under a bridge or by fisherman that
CPN700i and CPN1010i Multimedia Chart Plotters
Rotary Knob.
ShuttlePoint Knob must be pressed again.
key, tap on Fishfinder. In the bottom of the page the available selections
key, tap on Tide. In the bottom of the page 2 available selection appear:
Soft Key: an option window with
Page 97